View VSMG2700_4296691.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

VSMG2700
Vishay Semiconductors
High Speed Infrared Emitting Diode, RoHS Compliant, 830 nm, GaAlAs Double Hetero
FEATURES
* Package type: surface mount * Package form: PLCC-2 * Dimensions (L x W x H in mm): 3.5 x 2.8 x 1.75 * Peak wavelength: p = 830 nm * High reliability * High radiant power
94 8553
* High radiant intensity * Angle of half intensity: = 60 * Low forward voltage * Suitable for high pulse current operation * High modulation band width: fc = 18 MHz
DESCRIPTION
VSMG2700 is an infrared, 830 nm emitting diode in GaAlAs double hetero (DH) technology with high radiant power and high speed, molded in a PLCC-2 package for surface mounting (SMD).
* Good spectral matching with Si photodetectors * Floor life: 4 weeks, MSL 2a, acc. J-STD-020 * Lead (Pb)-free reflow soldering * Lead (Pb)-free component in accordance RoHS 2002/95/EC and WEEE 2002/96/EC with
APPLICATIONS
* Infrared radiation source for operation with CMOS cameras (illumination) * High speed IR data transmission
PRODUCT SUMMARY
COMPONENT VSMG2700 Ie (mW/sr) 10 (deg) 60 P (nm) 830 tr (ns) 20
Note Test conditions see table "Basic Characteristics"
ORDERING INFORMATION
ORDERING CODE VSMG2700-GS08 VSMG2700-GS18 Note MOQ: minimum order quantity PACKAGING Tape and reel Tape and reel REMARKS MOQ: 7500 pcs, 1500 pcs/reel MOQ: 8000 pcs, 8000 pcs/reel PACKAGE FORM PLCC-2 PLCC-2
ABSOLUTE MAXIMUM RATINGS
PARAMETER Reverse voltage Forward current Peak forward current Surge forward current Power dissipation tp/T = 0.5, tp = 100 s tp = 100 s TEST CONDITION SYMBOL VR IF IFM IFSM PV VALUE 5 100 200 1 180 UNIT V mA mA A mW
Document Number: 81472 Rev. 1.2, 04-Sep-08
For technical questions, contact: emittertechsupport@vishay.com
www.vishay.com 307
VSMG2700
Vishay Semiconductors
High Speed Infrared Emitting Diode, RoHS Compliant, 830 nm, GaAlAs Double Hetero
ABSOLUTE MAXIMUM RATINGS
PARAMETER Junction temperature Operating temperature range Storage temperature range Soldering temperature Thermal resistance junction/ambient Note Tamb = 25 C, unless otherwise specified acc. figure 8, J-STD-020 J-STD-051, soldered on PCB TEST CONDITION SYMBOL Tj Tamb Tstg Tsd RthJA VALUE 100 - 40 to + 85 - 40 to + 100 260 250 UNIT C C C C K/W
200 180
120 100 80 60
PV - Power Dissipation (mW)
160 140 120 100 80 60 40 20 0 0 10 20 30 40 50 60 70 80 90 100 RthJA = 250 K/W
IF - Forward Current (mA)
RthJA = 250 K/W
40 20 0 0 10 20 30 40 50 60 70 80 90 100
21339
Tamb - Ambient Temperature (C)
21340
Tamb - Ambient Temperature (C)
Fig. 1 - Power Dissipation Limit vs. Ambient Temperature
Fig. 2 - Forward Current Limit vs. Ambient Temperature
BASIC CHARACTERISTICS
PARAMETER Forward voltage Temperature coefficient of VF Reverse current Junction capacitance Radiant intensity Radiant power Temperature coefficient of e Angle of half intensity Peak wavelength Spectral bandwidth Temperature coefficient of p Rise time Fall time Cut-off frequency Virtual source diameter Note Tamb = 25 C, unless otherwise specified IF = 100 mA IF = 100 mA IF = 100 mA IF = 100 mA IF = 100 mA IDC = 70 mA, IAC = 30 mA pp TEST CONDITION IF = 100 mA, tp = 20 ms IF = 1 A, tp = 100 s IF = 1 mA VR = 5 V VR = 0 V, f = 1 MHz, E = 0 IF = 100 mA, tp = 20 ms IF = 1 A, tp = 100 s IF = 100 mA, tp = 20 ms IF = 100 mA SYMBOL VF VF TKVF IR Cj Ie Ie e TKe p TKp tr tf fc d 6 125 10 100 40 - 0.35 60 830 40 0.25 20 20 18 0.44 22 MIN. TYP. 1.5 2.3 - 1.8 10 MAX. 1.8 UNIT V V mV/K A pF mW/sr mW/sr mW %/K deg nm nm nm/K ns ns MHz mm
www.vishay.com 308
For technical questions, contact: emittertechsupport@vishay.com
Document Number: 81472 Rev. 1.2, 04-Sep-08
VSMG2700
High Speed Infrared Emitting Diode, RoHS Compliant, 830 nm, GaAlAs Double Hetero
BASIC CHARACTERISTICS
Tamb = 25 C, unless otherwise specified
Vishay Semiconductors
10 000
1.25
0.01
- Relative Radiant Power
e, rel
tp/T = 0.005
Tamb < 60 C
I F - Forward Current (mA)
1000 0.02 0.05 100 0.2 0.5 DC 10 0.1
1.0
0.75 0.5
0.25 0 740
1 0.01
95 9985
0.1
1
10
100
16972_1
800 - Wavelength (nm)
900
t p - Pulse Length (ms)
Fig. 3 - Pulse Forward Current vs. Pulse Duration
Fig. 6 - Relative Radiant Power vs. Wavelength
1000 Ie rel - Relative Radiant Intensity
I F - Forward Current (mA)
0
10
20 30 - Angular Displacement
100 t p = 100 s tp/T = 0.001
40 1.0 0.9 0.8 0.7 50 60 70 80
10
1 0
18873_1
1
2
3
4
94 8013
0.6
0.4
0.2
0
VF - Forward Voltage (V)
Fig. 4 - Forward Current vs. Forward Voltage
Fig. 7 - Relative Radiant Intensity vs. Angular Displacement
100
Ie - Radiant Intensity (mW/sr)
10 tp = 100 s 1
0.1 1
18874
10
100
1000
IF - Forward Pulse Current (mA)
Fig. 5 - Radiant Intensity vs. Forward Current
Document Number: 81472 Rev. 1.2, 04-Sep-08
For technical questions, contact: emittertechsupport@vishay.com
www.vishay.com 309
VSMG2700
Vishay Semiconductors
High Speed Infrared Emitting Diode, RoHS Compliant, 830 nm, GaAlAs Double Hetero
PACKAGE DIMENSIONS in millimeters
3.5 0.2
1.75 0.1
Pin identification
0.9
Mounting Pad Layout
1.2 area covered with solder resist
2.8 0.15
C
A
2.6 (2.8)
2.2
4 O 2.4 3 + 0.15 1.6 (1.9)
20541
SOLDER PROFILE
DRYPACK
Devices are packed in moisture barrier bags (MBB) to prevent the products from moisture absorption during transportation and storage. Each bag contains a desiccant.
300 250 255 C 240 C 217 C max. 260 C 245 C
FLOOR LIFE
Floor life (time between soldering and removing from MBB) must not exceed the time indicated on MBB label: Floor life: 4 weeks Conditions: Tamb < 30 C, RH < 60 % Moisture sensitivity level 2a, acc. to J-STD-020.
Temperature (C)
200 max. 30 s 150 max. 120 s 100 50 0 0 50 100 150 200 250 300 max. ramp up 3 C/s max. ramp down 6 C/s max. 100 s
DRYING
In case of moisture absorption devices should be baked before soldering. Conditions see J-STD-020 or label. Devices taped on reel dry using recommended conditions 192 h at 40 C (+ 5 C), RH < 5 %.
19841
Time (s)
Fig. 8 - Lead (Pb)-free Reflow Solder Profile acc. J-STD-020D
TAPE AND REEL
PLCC-2 components are packed in antistatic blister tape (DIN IEC (CO) 564) for automatic component insertion. Cavities of blister tape are covered with adhesive tape.
www.vishay.com 310
For technical questions, contact: emittertechsupport@vishay.com
4
Document Number: 81472 Rev. 1.2, 04-Sep-08
VSMG2700
High Speed Infrared Emitting Diode, RoHS Compliant, 830 nm, GaAlAs Double Hetero
Vishay Semiconductors
10.0 9.0
Adhesive tape
120
4.5 3.5
Blister tape
2.5 1.5 Identification Label: Vishay type group tape code production code quantity
13.00 12.75 63.5 60.5
Component cavity
94 8670
Fig. 9 - Blister Tape
180 178
14.4 max.
94 8665
3.5 3.1
2.2 2.0
Fig. 12 - Dimensions of Reel-GS08
10.4 8.4
5.75 5.25 3.6 3.4
1.85 1.65
4.0 3.6 8.3 7.7
120
4.5 3.5
0.25
1.6 1.4
4.1 3.9
2.05 1.95
4.1 3.9
2.5 1.5 Identification Label: Vishay type group tape code production code quantity
13.00 12.75 62.5 60.0
94 8668
Fig. 10 - Tape Dimensions in mm for PLCC-2
MISSING DEVICES
A maximum of 0.5 % of the total number of components per reel may be missing, exclusively missing components at the beginning and at the end of the reel. A maximum of three consecutive components may be missing, provided this gap is followed by six consecutive components.
De-reeling direction
94 8158
321 329
14.4 max.
18857
Fig. 13 - Dimensions of Reel-GS18
COVER TAPE REMOVAL FORCE
The removal force lies between 0.1 N and 1.0 N at a removal speed of 5 mm/s. In order to prevent components from popping out of the blisters, the cover tape must be pulled off at an angle of 180 with regard to the feed direction.
> 160 mm 40 empty compartments min. 75 empty compartments
Tape leader
Carrier leader
Carrier trailer
Fig. 11 - Beginning and End of Reel
The tape leader is at least 160 mm and is followed by a carrier tape leader with at least 40 empty compartments. The tape leader may include the carrier tape as long as the cover tape is not connected to the carrier tape. The least component is followed by a carrier tape trailer with a least 75 empty compartments and sealed with cover tape.
Document Number: 81472 Rev. 1.2, 04-Sep-08
For technical questions, contact: emittertechsupport@vishay.com
www.vishay.com 311
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000 Revision: 18-Jul-08
www.vishay.com 1

▲Up To Search▲

Price & Availability of VSMG2700

	To Download VSMG2700 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .